Lonex POM Ventilated Piston Head

  • Model: GB-01-10B
  • Shipping Weight: 0.02kgs
  • Manufactured by: Lonex


Polyoxymethylene (POM) piston head made by Lonex with ball-bearings.

Polyoxymethylene is a low-wearing, low-friction, high-strength and lightweight plastic. Its properties make it an excellent material for a piston head. Other manufacturers use polycarbonate, which is also lightweight and high-strength, but is extremely brittle and will shatter leading to catastrophic failures.

This particular example by Lonex features a flat face with 6 large counter-sunk ventilation holes drilled into the face. What does this mean? It means that compared with other piston heads, the larger ventilation holes allow the o-ring to expand earlier on in the piston stroke. The flat face of the piston distributes the impact of the over a larger area, decreasing likelihood of piston head breakage. Lastly, the face design of this piston head means that your sorbo pad is less likely to wear down.

So why a non-aluminum piston head? Simple! It decreases the weight of the piston. Less mass = faster cycle speed = higher ROF.

Note: We noticed some of these heads have a tiny bit of flash under the ports from drilling, we would recommend you to remove the piston o-ring and clean this off with a razor blade before installation. Airflow would be improved greatly if done so.

Tip: For even higher ROF, don't use the bearings that come with this piston head. Instead, use a bearing spring guide only as it takes the weight off the piston assembly.

This piston head can take up to an M170 spring and up if paired with a sorbo pad. How do we know? One of our DMRs run it.

Sold Out

To be notified when this product is back in stock please click here.

Current Reviews: 2

This product was added to our catalog on Tuesday 20 March, 2012.

Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “Lonex POM Ventilated Piston Head” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!