Lonex Enhanced Super Gear Set - High Speed Ratio (16:1)

  • Model: GB-00-04
  • Shipping Weight: 0.089kgs
  • Manufactured by: Lonex

$54.45

Lonex gears are made of heat-treated, high density steel for maximum durability and operating efficiency. This reduces the load on the bearings, motor and your battery.

This high-speed set features a ratio of 16:1 for increased ROF and strikes a good balance between speed and torque. Pair this gear set with a Lonex A1 Torque-Up or High Speed motor for the serious ROF setup.

The Bevel gear features 5 anti-reversal latches for fast back-wind arrest, preventing unnecessary wear on your motor and other gears.

Caution: For high ROF setups, care must be used to pair the gear set with the correct spring, motor, battery. In addition, modifications to the piston for optimal angle of engagement should be done to prevent catastrophic damage to the gear box.

Recommended springs: M110-M120 for high ROF (>30rps) setups. Experienced users may choose to pair this with a high-torque neodymium magnet motor (Lonex Orange) and an M130+ for excellent trigger response and crisp semi-auto fire - good for DMR setups.

Tip: When installing new gears, it is important to shim them properly to remove lateral movement. Grab some shims here and here.

Tip 2: Shimming can be a time-consuming process of guessing and checking. However, take the guessing out of the equation by checking your amperage load with this Watt Meter. Added a shim? Check the amp draw to make sure the shim didn't make things worse. Lower the amps = higher efficiency.

Sold Out

To be notified when this product is back in stock please click here.



This product was added to our catalog on Tuesday 20 March, 2012.

Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “Lonex Enhanced Super Gear Set - High Speed Ratio (16:1)” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!