Lonex 8mm Solid Steel Bushings

  • Model: GB-01-83
  • Shipping Weight: 0.008kgs
  • Manufactured by: Lonex


Lonex solid oil-less steel bushings are made from hardened, heat-treated steel and do not feature any cross-slot or "oil channels" which can increase stress at specific points on the gear shaft and lead to potential gearshaft failure.

Solid bushings are advantageous over bearing bushings due to the fact that small bearings are known to fail at extreme loads.

While both SHS and Lonex 8mm Solid Steel Bushings will work with our Lonex mechboxes, these Lonex bushings are a better fit and will sit flush against the wall of the mechbox.

Bushing Diameter: 7.90mm
Diameter Including Flange: 9.02mm
Flange Thickness: 0.40mm
Bushing Thickness: 2.10mm
Bushing Hole Diameter: 3.00mm

Tip: For a good ROF tradeoff, install these solid bushings on your sector and spur gear, but keep your bearings on your bevel gear because the bevel gear experiences less shear force due to its smaller diameter and orientation in relation to the pinion gear and spur gears.

Sold Out

To be notified when this product is back in stock please click here.

This product was added to our catalog on Wednesday 08 August, 2012.

Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “Lonex 8mm Solid Steel Bushings” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!