Our Services

With over a decade of experience working with airsoft, my only goal is to build you a reliable and high performing AEG that allows you to dominate the field. I'm located in Toronto, and will only take on clients locally. I offer a full range of services - from a complete simple tune-up and maintenance to one-off extreme custom builds. If you can think of something to do with your gun, I can make it happen.

Every project starts with dedicated time with you to help me understand your needs and requirements, so please email me at services@airsoftstore.ca to get started.

As an example, here's what I can do for you. Prices will vary depending on complexity, and every quote is customized for you.

Prices are for labour only, and do not include the cost of materials.

R-hop installation on Prometheus 6.03mm barrel - $55
R-hop installation includes:
  • Flush-mount Installation of an HS5 IR-hop patch onto Prometheus barrel (barrel must be purchased from us - either at time of service request or from a previous order. Why? Due to the number of fake Prometheus barrels floating around, this is the only way to guarantee authenticity)
  • Testing and tuning of R-hop patch to ensure optimum hop performance for all ammo weights (will not overhop 0.2g BBs and able to lift up to .43g ammo)



System Tune-up - $65 and up
Standard tune up includes a 5 Point inspection of your entire gun as well as your gearbox internals, which includes:

  • Hop up bucking
  • Piston teeth
  • Gears
  • Motor and pinion gear
  • Electrical contacts and wires
I will also perform the following:
  • Relube all internal parts as necessary
  • Reshimming of gears using the bevel to pinion method
  • Clean the inner barrel and clean the gearbox of any excess grease and debris.



FET install - $50 and up
FET installation includes:

  • Complete rewiring of mechbox with 16awg milspec wiring (price includes wire) and Lonex gold motor connectors for applicable platforms
  • Shrink-wrapping of all exposed wire components as well as FET itself
  • Added shrink-wrapping of extended wiring sections to ensure wire protection and increased space efficiency and wire management
  • Wiring of FET to reduce electrical load on trigger contacts
  • System stress-testing and evaluation of complete weapon system

The following builds are extremely popular for my clients:

Single-Stroke High-Speed Build (>25rps) - $120 and up
Complete High-Speed Build includes:

  • Install and shimming of high-speed gearset and motor
  • Installation of Sorbo Buddies
  • Cylinder windows precision-radius'd for enhanced mechbox durability
  • Weight-reduction of piston assembly as necessary (velocity goals dependent)
  • Compression parts checked and replaced as necessary to reduce and eliminate air leaks
  • Optimization of gears through short-stroking and battery choice to achieve performance goals
  • Full-retention of semi-auto firing capability without double-shooting
  • Optimization of hop-up seal for maximum energy transfer
  • System stress-testing and evaluation of complete weapon system

High-Power Build (>450fps) - $180 and up
Complete High-Power Build includes:

  • Install and shimming of gearset and motor
  • Installation of Sorbo Buddies
  • Cylinder windows precision-radius'd for enhanced mechbox durability
  • Weight-reduction of piston assembly as necessary (velocity goals dependent)
  • Compression parts checked and replaced as necessary to reduce and eliminate air leaks
  • Optimization through gear ratio selection and battery choice to achieve performance goals
  • Optimization of hop-up seal for maximum energy transfer
  • System stress-testing and evaluation of complete weapon system